SQ/2 LARGE CHARACTER INK JET PRINTING SYSTEM


The SQ/2 large character ink jet system prints high quality dot-matrix characters on a variety of products at a cost-effective price. The SQ/2 offers the lowest price per printed character in the industry today. Users can choose between two models: a water-based model for printing on porous surfaces like corrugated cartons, or as a solvent-based system for printing on non-porous product like plastics, stretch wraps, metals and more.


SQ/2 Printing System Specifications



Printer Type

Large character ink jet printer

Character Height

.75″ (1.9cm) in 7 x 5 matrix; .5″ (1.3cm) in 5 x 5 matrix, or
.5″ (1.3cm) in 7 x 5 matrix; .375″ (1cm) in 5 x 5 matrix, or
.375 (1cm) in 7 x 5 matrix; .25 (.6cm) in 5 x 5 matrix


Character Set

61 character ASCII set

Print Speed

20 feet/minute (6.1m/minute) to 200 feet/minute (61m/minute) line speed; optional extended character
width firmware allows for print speeds slower than 20 feet/minute

Message Length

60 characters per message; 64 memory locations

Communication

RS-232C, 9600 baud, 8 data bits, 1 start, 1 stop, Asynch

Software Features

24-hour clock, Julian date, counter, lot counter

Operating Features

Dot size, print delay, character width, photocell on/off, invert print, reverse print, purge routine

SQ/2 Exchange Program

Eliminates the need for costly service calls and minimizes downtime; troubled printheads and
components can be replaced in less than 5 minutes

Controller Dimensions

12″ (31cm) H x 12″ (31cm) W x 5.25″ (13cm) D

Controller Weight

10.5 lbs. (4.8kg)

Printhead Dimensions

3″ (7.6cm) H x 1.6″ (4.1cm) W x 7″ (17.8cm) L; dimensions are for the printhead only – an additional
3″ (7.6cm) is needed for the ink line and cabling which extends from the back of the printhead


Product Sensor

Diffuse beam photocell (24v) or hardware sinking signal


Electrical Requirements

110/120 VAC, 50/60Hz, 1.6 amp

Cabinet Construction

Industrial gauge coated steel

Operating Environment

38°F (3°C) to 122°F (50°C)

Substrate Capabilities

Porous or Non-Porous surfaces

Air Requirements

No external air needed

Ink Capabilities

Porous: Squid Ink SQ-60™ no-clog ink
Non-Porous: Several Squid Ink solvent based fluids to meet adhesion and dry time needs

Ink Volume

.5 (1.89 liters) gallon bottle standard; available upgrade (water-base ink only) to 5.0 gallon pail
(18.93 liters


High Quality Print On Any Type Of Product
Squid Ink’s SQ/2 ink jet printing system allows manufacturers
to print high quality dot-matrix characters on a variety of
products at a cost-effective price. In fact, the SQ/2 offers the
lowest price per printed character in the industry today. Users
can choose between two models: a water-based system for
printing on porous surfaces like corrugated cartons, paper or
wood, or a solvent-based system for printing on non-porous
products like plastics, stretch wraps, metals, glass or more.

User Flexibility
SQ/2 users also have the option of choosing from several
printhead configurations. Three different print sizes are
available: 3/4″, 1/2″ or 3/8″ character height. All printheads are
capable of printing both a 7 x 5 and 5 x 5 character matrix,
offering print sizes ranging from 1/4″ to 3/4″ in height. Users
also have the flexibility to run one or two printheads at any time.
All of these components are field-installable for future upgrade
to meet your application’s changing requirements.

User-Friendly System
The SQ/2 is designed for simple day to day operation. SQ/2’s
state of the art input device provides quick and easy message
programming and retrieval for up to 64 messages. Resident
software in the input device walks the user through a series of
prompts to program and save each message for printing ondemand.
The system can also be programmed and maintained
with a PC through a standard RS-232 port.

Innovative Technology And Proven Reliability
Patented micro-channeling technology eliminates the need for a
costly array of fluid valves. Squid Ink uses its own proven
plunger technology and distributes ink through a series of
channels, keeping production and maintenance costs to a
minimum, especially when compared to the costly valve
technology common in most ink jet printers today.

No More Service Calls
The SQ/2 was engineered inside and out for industrial-strength
operation. Heavy duty gauge coated steel cabinetry ensures
continuous operation in harsh, real world environments. If the
printer does fail, a fix can be completed in less than five
minutes. Quick and easy-to-install replacement printheads, PC
cards and air pump modules minimize downtime and eliminate
costly service calls. Best of all, the water-based SQ/2 utilizes
Squid Ink’s patented SQ-60™ no-clog ink, allowing users to
leave the ink in their printheads for an extended period of time
without flushing or cleaning, making it the most cost-effective,
low maintenance ink jet printing system available today.




The SQ/2 utilizes water-based or solvent-based inks for printing on a
wide range of porous and non-porous surfaces










Squid Ink’s patented
SQ-60™ no-clog ink
allows users to leave
ink in their printhead
without having to flush
their system



                                                                                             



Run one or two
printheads; select from
three different printhead
sizes; all components
are field-installable